"Our Technology, Your Solution"

Online Catalog

This dryer is designed as a companion to the 20 gallon ultrasonic wash/ rinse system. Parts are manually transported through the wash, spray rinse / immersion and dry process.

System Layout:
The equipment is stainless steel exterior frame with all stainless steel tank, and a stainless steel frame, and countertop.

Dryer overall dimensions are 32" L-R x30" F-B x 36" H

Equipped as follows:
Recirculation Hot Air Dryer
  • Tank dimensions 24" L-R x 16" F-B x 14" D. Fabricated from heavy gauge 304 stainless steel
  • Overall dimensions 32" L-R x 30" F-B x 36" H
  • 3,000 watts heat, with 1000 cfm blower
  • Nominal drying temperature 160º F to 170º F
  • Thermostat control, and high temperature safety
  • Digital temperature controller
  • Includes stainless steel lift-off cover
  • Drain 3/8 tubing to rear of console
Unit of Measure

Liquid Capacity

N/A 20 gal

Internal Tank Width

N/A 16 in

Internal Tank Length

N/A 24 in

Internal Tank Depth

N/A 14 in

Overall Width

N/A 30 in

Overall Length

N/A 32 in

Overall Height

N/A 36 in


N/A 16 in


N/A 24 in


N/A 14 in

Tank Material

N/A 304 Stainless Steel

Peak Ultrasonic Power

N/A 3000 W

Input Voltage

N/A 240 V


N/A 1


N/A 13 A

N/A Operational Controls:
The on / off switch with pilot light and digital temperature controller will be located on the control panel.

Services Required:
Electrical service: This console has a single point electrical connection, 240V, single phase, approx. 13A. The hot air dryer requires a 4" humidity exhaust duct.

Instructional Manual:
The equipment is furnished with an operator’s manual containing a system description, general care, safety precautions and a list and description of the operation system controls and indicators along with an electric schematic.

The machine is given a full operational test prior to shipping. If the customer wants to witness this test he must advise Ultrasonic Power Corporation in writing of any specific criteria in addition to the normal operational test. This notification of witnessing of the test must accompany the purchase order.

The equipment is warranted in accordance with the standard Ultrasonic Power Corporation warranty certificate.