"Our Technology, Your Solution"

Online Catalog

This ultrasonic cleaning system is designed to clean stainless steel filter elements. The system utilizes water and detergent in the ultrasonic cleaning tank. Parts are manually transported through the wash process.

System Layout:
The system is designed with a stainless steel exterior frame with all stainless steel tanks and a stainless steel countertop. The ultrasonic generators are mounted within the frame cabinet. The countertop is fitted with a drip ring around each tank opening to reduce run-off effects. System is built to provide a degree of protection against light overspray and splashing water.

Overall console dimensions: 23" x 31" with a counter top height of 47".

Equipped as follows:
Ultrasonic Cleaning Tank (each tank):
  • Tank dimensions: Octagonal shaped, 10" across x 38" deep (14 gallons)
  • Working dimensions: 10" across x 36" liquid depth
  • Fabricated from 12 gauge, 316L stainless steel
  • 1000 Watts, 40kHz transducers
  • 1000 Watts Average power, 2,000 Watts peak power
  • 1000 Watt Ultrasonic generator with Radio Frequency Interference (RFI) filter
  • 1" drain with 1/4 turn brass ball valve
  • 1000 Watts of thermostatically controlled heat
  • Sound dampening insulation: typically reduces noise by 5 to 10 decibels
Unit of Measure

Liquid Capacity

N/A 14 gal

Internal Tank Width

N/A 10 in

Internal Tank Depth

N/A 38 in

Overall Width

N/A 23 in

Overall Length

N/A 31 in

Overall Height

N/A 47 in


N/A 10 in


N/A 36 in

Tank Material

N/A 316L Stainless Steel

Ultrasonic Power

N/A 1000 W

Peak Ultrasonic Power

N/A 2000 W

Input Voltage

N/A 120 V240 V


N/A 1


N/A 12 gauge


N/A 11.5 A19 A

Cord Length

N/A 14 ft

N/A Ultrasonic:
The ultrasonic power on this console (per tank) is supplied by one 1000 watt, 40 kHz ultrasonic sweep generator. The total ultrasonic power is rated at 1,000 watts average output and 2,000 watts peak power per tank. The ultrasonic tank is equipped with eighteen (12) "Vibra-bar®" transducers (24 piezoelectric elements) permanently attached to the radiating surface. This system provides "Simultaneous Multi-Frequency™" ultrasonics to insure reliable and uniform ultrasonic power throughout the bath. The ultrasonic generators include an RFI (radio frequency interference filter) that exceeds the United States FCC (Federal Communications Commission) regulations.

The wash console will be plumbed for single point connection for the drain. The connection will be located on the side of the console. The drain valves will be accessible from the side of the console.

Operational Controls:
Ultrasonic generator on/off switches and power intensity controls are on the control panel of the end of the console.

Services Required:
Electrical service:
The system has a single point, 120 VAC, 19A, single-phase connection. A 14 ft power cable will be provided. 240VAC available, 11.5A. (Please specify)
Fill water: Clean tap water will maximize the effectiveness of the cleaning detergent. Separate drain valves for the ultrasonic wash tanks will be provided if customer purchases optional tank.

Drawings and Manual:
The equipment is furnished with the following:
Operator's manual containing a description of the ultrasonic generator and transducers, general care, safety precautions, and a list and description of the operation system controls and indicators along with an electronic schematic and general layout drawing.

The machine is given a full operational test prior to shipping and is documented accordingly.

The equipment is warranted in accordance with the standard Ultrasonic Power Corporation warranty certificate.