"Our Technology, Your Solution"

Online Catalog

Our line of energy efficient generators provides the high-frequency ultrasonic force for the best precision washers in the industry.  These models are perfectly designed for use with either our own ultrasonic cleaning systems or constructions of your own design.  Capable of both electrical and mechanical agitation featuring extreme frequency fluctuation control, our generators are exactly the pieces you have been looking to incorporate in your own design. Multiple generators can be banked to deliver even better results using synchronized frequencies and uniform displacement.

Unit of Measure


N/A 13.3 cm5.25 in


N/A 34.9 cm13.75 in


N/A 31.75 cm12.5 in

Sweep Frequency

N/A 4 kHz

Ultrasonic Power

N/A 500 W

Ultrasonic Frequency

N/A 68 kHz


N/A 120 V

Adjustable Sweep Rate

N/A 100 to 1000 Hz

Input Frequency

N/A 50 Hz60 Hz


N/A 1

Part Number

N/A 53-68-151


  • 40 kHz "Simultaneous Multi-Frequency™"
  • 500 Watt or 1000 Watt 100/120/220/230/240/480 Volt, 50/60 Hz
  • Capable of Continuous Operation
  • Power Intensity Control
  • Solid State Circuitry
  • Meets FCC Requirements
  • Adjustable Sweep Rate: 100 to 1000 Hz
  • Circuit design protects from shorts or open in output
  • Completely interchangeable with standard generator unit
  • Full Two year Warranty
  • A sweep frequency circuit which operates at 40 kHz and sweeps 2 kHz. The speed of sweep can be adjusted from the range of 100 to 1000 times per second depending on the desire of the end user and the fluid that will be utilized in the tank.
  • The 5300 has the ability to perform in a variety of aqueous and semi-aqueous chemistries.
  • The 5300 has constant output power with less than 5% change in spite of load and/or temperature variations of the liquid volume and product mass being cleaned. And the 5300 solid state circuitry is protected from shorts and opens on the load side.

Additional Information


For over 20 years, Ultrasonic Power Corporation has been manufacturing generators and transducers designed for use in the best ultrasonic cleaning equipment. Our components are the current industry standard for quality and reliability. Ultrasonic cleaning manufacturers depend on our parts to build their own systems in order to sell them to you at a higher cost.  Why not cut out the middle man and build a custom cleaning system for yourself? Self-designed ultrasonic cleaning services are just one of the investments you can make into your business today that will result in concrete visible results.

This model is one of the most electrically efficient ultrasonic cleaning generators available on the market today. This powerful, state-of-the-art generator has two simple controls for easy use. When applied with Vibra-Bar® transducers, the model delivers Simultaneous Multi-Frequency® for both an electrical sweep frequency and a mechanical multi-frequency movement of the Vibra-Bar® transducers. Producing uniform cavitations with aqueous as well as semi-aqueous material, these dual capacity ultrasonic generators provide the most effective cleaning action available in the industry.

The Model 5400 generator incorporates a new patent-pending circuit which the company has called a “Transducer Status Indicator,” which will indicate the status of the transducers connected to each 500 watt output. An LED will indicate if there is a problem.

The new Model 5400 also incorporates an Overheat Protection System Indicator that will protect the generator from high temperatures caused by overheating due to air blockage or fan failure. This will practically eliminate problems with operators forgetting to clean the generators which invariably results in failures.


The Model 5400 generator also includes a PLC input/output connector with On/Off control, intensity control, sweep control, alarm output, and power indicator output and provides the ability to control the generator externally.